www.teslica.com
13
To lock suspension in place, rotate the dial
clockwise at the top of the right side fork. To
unlock, turn dial counter clockwise.
To stiffen the suspension, turn the dial at
the top of the left fork clockwise to desired
setting. To soften the ride, turn the dial
counter clockwise to desired setting.
4.9 CARGO RACK
The cargo rack is designed to carry a max
load of 25kg. A pannier may be added but
be sure that it does not interfere with the
drive and gears.
5.1 ROUTINE INSPECTION OF
ELECTRIC BIKE PRIOR TO USE
1. Install battery into slot and turn on
power. Verify all electrical components
are functioning correctly.
2. Check thumb throttle to make sure it
does not stick and returns to original
position
3. Test brakes and make sure brake
indicator appears on LCD screen
4. Conduct a safety inspection (see notes
in next column under Maintenance)
5. Check weather conditions and use
proper judgment for safe riding
With regular use of electric bikes a number
of mechanical and electrical parts will
become worn, or deteriorated and may lead
to lower performance or loss of functions.
Nuts and bolts will loosen and possibly fall
off due to vibrations. These items must be
05
USE + MAINTENANCE
regularly inspected, maintained, adjusted,
repaired and replaced when necessary for
optimal performance, longevity and safety.
Neglect of routine inspection and mainte-
nance may lead to accidents causing bodily
harm, injury or death.
5.2 MAINTENANCE
Before each ride be sure to inspect the
following items and perform any necessary
maintenance, adjustments, repairs and or
replacements for safe operation:
1. Inspect the tires to make sure the tread
is not overly or unevenly worn and they
have proper pressure
2. Inspect the rims and spokes for damage,
trueness and tightness. Free spin the
wheels
3. Inspect the handlebars and headset for
alignment and make sure there is no play
4. Inspect the brake levers, wires, calipers,
discs and pads.
5. Inspect the gear shifters, wires, derail-
leurs, chain, freewheel and crank
6. Inspect the pedals. Make sure they are
torque in place and spin freely
7. Inspect the suspension
8. Inspect the frame for cracks, bends and
corrosion
9. Inspect the saddle and post
10. Inspect the headlight, reectors, bell
and kickstand
11. Inspect all nuts and bolts for proper
torque
12. Inspect the battery and all electrical
components
To Next Page
Loading...