PULLER-TENSIONER
Model: AFS303
Manual: MI-AFS303-320-00-GB
2.14 RESPONSIBILITY
The use of the machine for scopes different from those foreseen on paragraph 2.3 (Typology and
using field), even if not well described in this manual, has to be considered extremely dangerous and
then forbidden.
The non-respect of the prescribed restrains causes a situation of improper use for technical
and persons safety purposes and relieve the manufacturer from any responsibility, civil or
penal, in case of accidents to persons or damages to things, causing the loss of warranty.
The manufacturer responsibility declines even when one of the following situations happens:
a. for the consequences caused by tampering and/or modifications carried out without the
manufacturer’s written acceptance (in this case the operator becomes the manufacturer with
relevant obligations and responsibilities, both civil and penal)
b. for the use of not original spare parts
c. or bad maintenance
d. for the use with disconnected safety devices
e. for the connection to machine and/or plans not produced and not directly authorised by the
manufacturer in a written acceptance.
2.15 APPLIED NORMS
If the machine is commercialized in C.E. responds to the following regulatory framework:
2006/42/CE Norm of the European Parliament and Council referring to the laws of the machines
member States.
2004/108/CE Norm of the European Council referring to the laws of the electromagnetic
compatibility member States.
If the machine is commercialized outside the C.E. was made reference to the following regulatory
framework:
2006/42/CE Norm of the European Parliament and Council referring to the laws of the machines
member States.
2004/108/CE Norm of the European Council referring to the laws of the electromagnetic
compatibility member States.
To Next Page
Loading...
