18
Feature Values
Battery test Internal circuit for
permanent battery status
monitoring. Calibrator does
not emit signal if the LED
changes from green to red,
voltage is then too low.
Dimensions in mm (lxbxh) 113 x 63 x 44
Weight Approx. 170g (incl. battery)
EC guideline 89/336/EEC
6. Initial Operation
1
Open battery compartment.
2
Insert battery, observe +/-.
3
Close battery compartment.
- The instrument is ready to operate.
- The instrument shows its functionality
by the ”Power ON” LED and a beep
sound after it is switched on.
To Next Page
Loading...
