23
77.. PPrrooggrraammmmiinngg
Programming eended
Click on
Apply
to transmit the programming to the data logger.
A measuring program can only apply in the data logger if it is in
the
Wait
or
End
mode.
If a measurement is running (
Record
mode):
Finish the measurement by clicking on
Stop.
- The
Programming data
window opens to confirm the following
programming.
7.6 CClosing tthe cconnection
1
Click on the connection you wish to close with your right mouse
button in the
Data
window.
2
Select
Close
.
- The connection to the data logger is closed.
To Next Page
Loading...
