22
77.. PPrrooggrraammmmiinngg
Duration:
Indicates running time of program calculated on the basis of the
values for
Start criterion
,
Measuring rate
and
Stop criterion
.
If the
Wraparound
stop criterion is selected, the length of time until
the memory is full is calculated.
Estimated battery life:
Indicates estimated battery life.
Title:
Enter a Title for the measuring program.
Maximum 24 characters can be entered.
The title of the measuring program is accepted into the testo
ComSoft
software when the data logger is read out. The title will
appear at the top of the printout when the protocol is printed on
the testo 575 printer.
Comments:
Additional information on the measuring program can be entered
here.
The entered text is printed on the testo 575 printer printout. Up to
96 characters can be entered. The fast printer automatically enters
return after every 24 characters.
Send to:
Activate the function by clicking on the selection window and
enter an e-mail address in the text box.
Once the measurement protocol has been opened in the testo
ComSoft
software, you can send it by e-mail via
testo-Logo
>
Senden
(Comsoft 4) or
File
>
Send ... by emai
. (Comsoft 3). The
entered email address and the log are automatically saved in your
e-mail.
System requirement for this function:
Microsoft Windows 95 or newer and
Microsoft Internet Explorer 5.0 or newer.
Start and Stop:
Click on
Start
to start a measuring program..
This function can only be selected if
PC start
has been selected as
Start criterion
.
Click on
Stop
to end a measuring program.
This function can only be selected if a measurement is running.
To Next Page
Loading...
