Need help?Do you have a question about the TESTO 606-1 and is the answer not in the manual?
General| Measurement principle | Capacitive |
|---|---|
| Measuring range humidity | 0 to 100% RH |
| Resolution moisture | 0.1% |
| Resolution humidity | 0.1 %RH |
| Storage temperature | -20 to +70 °C |
| Battery type | 2 x AAA |
| Dimensions | 119 x 46 x 25 mm |
| Weight | 90 g |
| Sensor type | Humidity sensor |
| Battery life | 200 hours |
| Measuring range material moisture | 6 to 90% |
| Operating temperature | 0 to 50°C |
Diagram of the testo 606-1 with numbered parts: protection cap, sensing electrodes, display, control keys, battery compartment, test contact.
Instructions for basic settings, switching instrument on/off, display light, and selecting display mode.
Read documentation carefully before use. Keep document for reference and hand on to subsequent users.
Operate instrument properly, within parameters, and avoid force. Store away from aggressive substances.
Dispose of rechargeable batteries at collection points. Return product to Testo for environmentally friendly disposal.
The testo 606-1 is a material moisture measuring instrument for wood or building materials to determine drying progress.
Sensors, parameters (% by weight, %rH, td, wb, °C, °F), measuring ranges, resolutions, accuracies, measuring rate.
Protection class, ambient/storage conditions, voltage supply, battery life, dimensions, weight, directives, warranty.
Instructions for inserting batteries and basic settings, including configuration mode and auto-off function.
Instructions for switching the instrument on and activating the display light.
Select material type and number to match material moisture indication on display.
Test the instrument's functionality by pressing buttons and connecting to the test resistor.
Instructions for changing the display view and switching the instrument off.
Procedure for opening the battery compartment, replacing batteries, and closing the compartment.
Instructions for cleaning the instrument housing using a moist cloth and mild soap.
Troubleshooting common issues like 'Hi or Lo' readings, 'Test: ok' not lighting up, or defective electrodes.
Table of material types and their equilibrium moisture content in building materials at 20°C and 65% RH.
Guideline values for wood installation moisture based on DIN 1052-1 for different building applications.
To Next Page
