Need help?Do you have a question about the TESTO 610 and is the answer not in the manual?
General| Type | Electronic hygrometer |
|---|---|
| Purpose | Indoor |
| Thermometer | Yes |
| Product color | Black, Silver |
| Temperature accuracy | 0.5 °C |
| Humidity measuring range | 0 - 100 % |
| Relative humidity accuracy | 2.5 % |
| Temperature measurement range | -10 - 50 °C |
| Temperature measurement units | °C |
| Storage temperature (T-T) | -40 - 70 °C |
| Power source | Battery |
| Battery type | AAA |
| Battery voltage | 1.5 V |
| Number of batteries supported | 2 |
| Display type | Digital |
Weight and Dimensions| Depth | 25 mm |
|---|---|
| Width | 46 mm |
| Height | 119 mm |
| Weight | 90 g |
| Diameter | - mm |
Overview of the instrument's external components, including sensors and control buttons.
Steps for installing batteries and performing initial device setup and configuration.
Procedure for setting temperature units (°C/°F) and auto-off function.
Instructions on how to power on, turn off, and activate the display backlight.
How to cycle through different measurement displays and select hold, max, or min values.
Information about the document, including registration number and importance of reading the manual.
Guidelines for safe usage, avoiding damage, and proper storage of the instrument.
Instructions for proper disposal of batteries and the device at the end of its lifecycle.
Defines the intended use of the Testo 610 for measuring temperature and humidity.
Details sensor types, measurement ranges, accuracy, power, dimensions, and weight.
Lists relevant EU directives and standards applicable to the instrument.
Instructions on placing the instrument and ensuring proper air circulation for accurate readings.
How to select displayed parameters (humidity, dew point, wet bulb) and display modes (current, hold, max, min).
Procedure for resetting the saved maximum and minimum measured values.
Step-by-step guide for opening the battery compartment and replacing batteries.
Recommendations for cleaning the instrument's housing using a damp cloth and mild soap.
Addresses common display messages like 'Hi'/'Lo' and low battery, providing solutions.
To Next Page
