TESTO 606-1 User Manual

16
2 Connect sensing electrodes with the contacts of the test
resistor on the top of the protection cap.
-
Test flashes.
-
Test: ok lights up: instrument is functioning.
Test: ok does not light up: test not possible, see chapter
'Tips and assistance'.
3 Press back to measurement menu.
²
Changing the display view:
Adjustable views
· Current reading
· Hold: Readings are held.
i Press until the desired view appears.
²
Switching the instrument off:
i Press and hold until the display goes out.
Maintaining the product
±
Changing batteries:
1 To open the battery compartment, push the battery cover
down.
2 Remove used batteries and insert new batteries
(2x 1.5 V type AAA). Observe the polarity!
3 To close the battery compartment, push the battery cover
back on.
±
Cleaning the housing:
i Clean the housing with a moist cloth (soap suds) if it is dirty.
Do not use aggressive cleaning agents or solvents!
Using the product

TESTO 606-1 Specifications

General

Measurement principle	Capacitive
Measuring range humidity	0 to 100% RH
Resolution moisture	0.1%
Resolution humidity	0.1 %RH
Storage temperature	-20 to +70 °C
Battery type	2 x AAA
Dimensions	119 x 46 x 25 mm
Weight	90 g
Sensor type	Humidity sensor
Battery life	200 hours
Measuring range material moisture	6 to 90%
Operating temperature	0 to 50°C