15
3 Press ( ) to confirm the input.
- The instrument changes to measuring mode.
Using the product
To ensure correct readings, repeat the measurement at several
points. Always measure wood moisture across the grain.
The values displayed are highly dependent on the building
material/manufacturer used, and on the ambient conditions .
As the materials are natural, the same materials can vary from
batch to batch.
²
S
witching the instrument on:
i Press .
- Measuring mode is opened.
²
Switching the display light on:
The instrument is switched on.
i Press .
- The display light goes out automatically if no key is
pressed for 10 seconds.
²
S
etting the material characteristic curve:
The material moistur
e is indicated in the top line of the
display. The material symbol (wood) or (building
material) is displayed with the relevant material number (see
enclosed sticker for the inside of the protective cap).
Settable materials Measuring range
1. beech, spruce, larch, birch, cherry, walnut 8.8...54.8 % by weight
2. oak, pine, maple, ash-tree, douglas fir, meranti 7.0...47.9 % by weight
3. cement screed, concrete 0.9...22.1 % by weight
4. anhydrite screed 0.0...11.0 % by weight
5. cement mortar 0.7...8.6 % by weight
6. lime mortar, plaster 0.6...9.9 % by weight
7. bricks 0.1...16.5 % by weight
i Press several times until the desired material
characteristic curve appears.
²
Testing the instrument function:
1 Press several times until
Test: lights up.
de
enfresitptsvnl????
Using the product
To Next Page
Loading...
Need help?
General
