TESTO 400 - 9 Software; Purpose; System Requirements

9 Software
16
9 Software
The testo 400 has a USB port, via which the measuring instrument can be
connected to the PC.
Knowledge of Windows
®
operating systems is required to work with the
software.
9.1 Purpose
The testo DataControl measurement data management and analysis software
enhances the functionality of the testo 400 measuring instrument with lots of
useful functions:
• Manage and archive customer data and measuring site information
• Read out, evaluate and archive measurement data
• Presenting readings in graphic form
• Create professional measurement reports from the existing measurement
data
• Conveniently add images and comments to measurement reports
• Data import from and data export to the measuring instrument
9.2 System requirements
Administrator rights are required for installation.
Operating system
The software can be run on the following operating systems:
• Windows
®
7
• Windows
®
8
• Windows
®
10
Computer
The computer must meet the requirements of the operating system in each
case. The following requirements must also be met:
• Interface USB 2 or higher
• DualCore processor with minimum 1 GHz
• Minimum 2 GB RAM
• Minimum 5 GB available hard disk space
• Screen with a resolution of at least 800 x 600 pixels