3 Product-specific information
5
Product-specific information
• Do not carry out measurements on live components.
• Do not expose handles and feed lines to temperatures in excess of 70°C
unless they are expressly approved for higher temperatures. Temperature
specifications on probes/sensors refer only to the measuring range of the
sensor system.
• Only open the measuring instrument if this is expressly described in the
documentation for the purposes of maintenance or servicing.
Intended use
The testo 417 is a compact instrument for measuring flow velocities and
temperature by means of an integrated 100 mm vane with temperature sensor.
It is intended for indoor use only.
The product is designed for the following tasks/areas:
• Volume flow measurements at outlets (with funnel accessories)
• Temperature measurement of flows
The product should not be used in the following areas:
• In potentially explosive atmospheres.
• For diagnostic measurements in the medical field.
1.888.610.7664 sales@GlobalTestSupply.com
www.Testo-Direc t.com
To Next Page
Loading...
