TESTO 523 - First Steps; Inserting Batteries; Switching Instrument On

First steps6
First steps
²
Inserting bbatteries/rechargeable bbatteries:
1 Fold out the suspension hook and open battery compartment (clip
fastening).
2 Insert batteries (included in delivery) or rechargeable batteries (4x 1.5V,
Type AA /Mignon/LR6) into the battery compartment. Observe polarity!
3 Close battery compartment.
At longer periods of disuse: Remove batteries.
²
Switching iinstrument oon:
i Press .
- Initialization phase:
· All display sements light up (duration: 2s).
· Instrument type, serial number and Firmware version are displayed (duration: 2s).
- The measurement view is opened
-or-
- When switched on for the first time after battery replacement:
StAndArd bAtt flashes.
The battery type used must be entered so that the battery capacity is
correctly displayed. The instrument switches off after one minute, if no
setting is made.
1 Press or several times to set the battery type used:
StAndArd bAtt = Standard batteries, rEchArGE bAtt = Rechargeable
batteries.
2 Press function button OK to confirm the setting.
- The configuration menu is opened.
3 Continue with
Making ssettings
, step 2.
²
Making ssettings:
1 Press function button Set.
- The configuration menu is opened and the settable parameter flashes.