6. Setting the instrument 47
Delete
The entire memory with all measurement protocols can be cleared.
²
Clearing tthe mmemory:
The main menu is open, Menu is displayed.
1 Memory ¬¬Delete ¬ .
2 Press to clear the entire memory.
6.2.2 Measuring program (735-2 only)
A measuring program can be programmed and activated/deactivated:
Designation Description
Off Measuring program switched off: Readings can be stored manually
AUTO Automatic measuring program: The measuring cycle (min. 0.5s) and the number of
readings can be set freely.
²
Deactivating aa mmeasuring pprogram:
The main menu is open, Menu is displayed.
1 Meas.Prog ¬ .
2 Press / to select Off and confirm with .
- The instrument returns to measurement view.
²
Programming aand aactivating tthe AAUTO mmeasuring pprogram:
The main menu is open, Menu is displayed.
1 Meas.Prog ¬ .
2 Press / to select AUTO and confirm with .
The measuring cycle is set in the order: hours /minutes/seconds.
3 Press / to set the measuring cycle in hours and confirm with
.
4 Perform the setting for minutes and seconds as described in step 3.
5 Press / to set the number of readings and confirm with .
- The instrument returns to measurement view.
OK
OK
OK
OK
OK
OK
OK
OKOK
de
en
fresitptsvnl????
To Next Page
Loading...
