TESTO 870 - Saving Images as JPEG; Power-Saving Options

5 Performing the measurement
24
1
-
Open
SuperResolution
function. For how to proceed: see Getting to
know the menu
, page
11
.
2
- Press
OK
to enable or disable the function.
3
-
Move the
Joystick
until
OK
is selected.
4
- Press
OK
.
Save JPEG
Infrared images are saved in BMT (image with all temperature data) format. The
image can also be saved in JPEG format (without temperature data) at the
same time. The image content corresponds to the infrared image shown on the
display, including scale display and image marks for the selected measuring
functions. The JPEG file is saved under the same file name as the associated
BMT file and can be opened on the PC, even without using the IRSoft PC
software.
1
- Open
Save JPEG
function. For how to proceed: see Getting to know
the menu
, page
11
.
2
-
Press
OK
to enable or disable the function.
3
- Move the
Joystick
until
OK
is selected.
4
-
Press
OK
.
Power-save options
The illumination intensity of the display can be set. A lower intensity increases
the battery life.
1
- Select
Power-save options
function. For how to proceed: see
Getting to know the menu, page
11
.
2
- Move the
Joystick
up/down to select the required intensity level
and then press
OK
.