TESTO 870 - Language Settings; Temperature Unit Selection; Setting Time and Date; Resetting Image Counter

5 Performing the measurement
25
Language
The user interface language can be set.
1
- Select
Language
function. For how to proceed: see Getting to
know the menu
, page
11
.
2
- Move the
Joystick
up/down to select the required language and
then press
OK
.
Temperature unit
The temperature unit can be set.
1
- Open the
Temperature unit
submenu. For how to proceed: see
Getting to know the menu.
2
- Move the
Joystick
up/down to select the required unit and then
press
OK
.
Set time/date
Time and date can be set. The time and date format are set automatically
based on the selected user interface language.
1
- Select
Set time/date
function. For how to proceed: see Getting
to know the menu
, page
11
.
2
- Move the
Joystick
to the right/left to select the required setting
option.
3
-
Move the
Joystick
up/down to set the value.
4
- After setting all values, press
OK
.
Reset counter
After a reset, the consecutive numbering of images starts again from
the beginning. When saving images, already saved images with the
same number are overwritten!
Back up all saved images before resetting the counter to prevent
possible overwriting.