35
i Press several times until the desired value is
displayed.
- The following are displayed in turn:
· Hold: the recorded reading
· Max: Maximum value
· Min: Minimum value
· The current reading
- In addition to the recorded, maximum or minimum
readings, the 2nd reading line shows the current
reading
²
Resetting tthe mmaximum/minimum vvalues:
The maximum/minimum values of all channels can be
reset to the current reading.
This function is not available if the Auto Hold function
is switched on.
1 Press several times until Max or Min lights up.
2 Press and hold .
- The displayed value flashes twice. All maximum and
minimum values are reset to the current reading
²
Printing rreadings:
The readings shown on the display (current reading,
recorded reading or max./min. reading) can be printed
out.
A Testo printer is required (accessory part).
With the Max./Min. print function switched on, the
maximum and minimum values are printed out as well
as the current reading or recorded reading.
º See the chapter PERFORMING SETTINGS.
1 Configure the instrument so that the value to be
printed is shown on the display.
2 Press .
deenfresitptsvnl????
6. Measuring
To Next Page
Loading...
