Need help?Do you have a question about the TESTO 950 and is the answer not in the manual?
General| Accuracy (Temperature) | ±0.5 °C |
|---|---|
| Resolution (Temperature) | 0.1 °C |
| Operating temperature | -20 to +50 °C |
| Storage temperature | -20 to +60 °C |
| Battery life | Approx. 20 hours |
| Dimensions | 219 x 68 x 50 mm |
| Weight | Approx. 250 g |
| Power supply | 4 x AA batteries |
Instructions for printer connection, power, paper loading, and battery replacement.
Procedure for wireless data transfer from instrument to printer.
Guide to error messages, their causes, and elimination steps.
Using the barcode pen for automated data allocation and location management.
Description and operation of material and building moisture probes.
Transmitting stored data to PC via 'Send' function and HyperTerminal.
Using Pitot tubes and setting density parameters for velocity readings.
Calculating and printing the degree of turbulence.
Safety for leak detection and procedures for CO/CO2 measurements.
To Next Page
