TESY GH 200 - Mounting and Fixing Instructions; Wall Mounting Preparation; Drilling and Peg Insertion; Bracket Attachment

4 Usage and Storage Instructions
EN
PACKAGE
•
After unpacking the appliance you should check if
it is not damaged during transportation and if all
the components are included! In case that you nd
out any damage or incomplete package you should
connect with your authorized retailer!
•
Do not discard the original packing box! It could be
used to store the appliance during transportation in
order damages to be avoided!
•
The disposal of the packing material should be
done in the appropriate way! Children should be
prevented from playing with the polyethylene bags!
MOUNTING ON A WALL
1. Please ensure that the walls of the installation
location without wires, pipes, etc., to ensure that the
device can be securely mounted on the wall
2. The appliance is intended only for vertical wall
mounting! Floor or ceiling mounting is forbidden!
3. Never position the appliance right below a socket
outlet!
4. The appliance should be assembled and connected
by a qualied electrician. The installation process
should be isolated from the mains before electrical
connection works are to be done.
5. Position the power cord so that it does not hamper
free movement of people and not to be stepped on!
Use only approved extensions, which are proper to
the appliance, i.e. they have a compliance sign!
6. The power cord should not be in touch with hot
parts of the appliance!
7. Do not use the appliance in rooms smaller than 4
square meters.
8. The appliance inlet and outlet openings must not
be blocked! Distance between the appliance and
the ceiling is at least 0.2m. Distance on both sides of
the appliance to the wall is at least 0.25m. Distance
between the outlet and the bottom is min 0.5m.
FIXATION OF THE APPLIANCE ON WALL
1. Choose a wall on which there is enough space
2. Use a Ø6 drill to drill 4 holes according to following
positions:
3. Fit the pegs from the accessory bag in these holes.
4. Detach the up-hook from the back of the appliance
and put it in the position of the two pegs at the top.
Fix the up-hook on wall with two ST4X35 screws.