Tetra EasyCrystal FilterBox 300 User Manual

10
EasyCrystal FilterBox 300
UK
Cleaning the EasyCrystal FilterBox
Procedure:
Fig. G
1. Dismantle the device in the sequence shown in the diagram.
– Clean soiled parts with water or a special cleaner for
aquariums. Other cleaning products may harm the crea-
tures and plants in the aquarium.
– Check the BioFoam filter foam. If it is clogged up, it should
ideally be washed in skimmed aquarium water to retain
beneficial bacteria.
– Clean out the biological filter balls with lukewarm water.
2. Reassemble the device in reverse order.
TROUBLESHOOTING
If you are unable to rectify any faults yourself, contact your local
retailer or Tetra Customer Service.
Malfunction Cause Solution
Pump will not operate Pump is not receiving
power
Connect the power
supply
Pump is faulty Contact your retailer
or Tetra Customer
Service
Blocked impeller Clean the pump
Pump is making
unusual noises
Pump is clogged up Clean the pump
Insucient flow of
water
Pump is clogged up Clean the pump
Pump is faulty Contact your retailer
or Tetra Customer
Service
Worn impeller Replace impeller
Water is cloudy or
dirty
Filter cartridge used
up
Change the EasyCrys-
tal filter cartridge

Tetra EasyCrystal FilterBox 300 Specifications

General

Brand	Tetra
Model	EasyCrystal FilterBox 300
Category	Water Filtration Systems
Language	English