To Next PageTo Next PageHow to fix a leaking Tetra Water Filtration System filter head?
If the filter head of your Tetra Water Filtration System is leaking, it could be due to a few reasons. First, check if the attachment clips are open and close them. Second, there might be dirt or foreign particles present, so clean the area. Lastly, the filter head seal might be faulty, requiring cleaning or replacement.
What to do if water is not circulating in Tetra Water Filtration System?
If water isn't circulating in your Tetra Water Filtration System, it could be due to a few reasons. There might not be enough water in the filter housing; press the start button several times to initiate a pumping motion. Alternatively, there could be an air pocket in the filter; increase the distance between the filter and the water level. Finally, check for any leaks and stop them.
Why is the water flow reduced in my Tetra Water Filtration System?
Reduced water flow in your Tetra Water Filtration System can occur due to several reasons. The valve might be closed, so you should open it. Hoses could be bent, requiring repositioning. Also, the filter, filter media, or tube system might be dirty and require cleaning or replacement. Finally, check for leaks or if the system is drawing air; stop any leaks or ensure the intake pipe is below the water level.
What to do if the motor is not working in my Tetra Water Filtration System?
If the motor in your Tetra Water Filtration System isn't working, first check the power supply. If the power supply is fine, the impeller might be faulty or blocked. In that case, clean or replace the impeller.
What to do if my Tetra Water Filtration System motor is not working?
If the motor of your Tetra Water Filtration System isn't working, first check the power supply. If the power is on, the impeller might be faulty or blocked. Try cleaning or replacing it if necessary.
What to do if water is not circulating in my Tetra Water Filtration System?
If water isn't circulating in your Tetra Water Filtration System, it could be due to several reasons. There might not be enough water in the filter housing; press the start button several times to initiate a pumping motion. Alternatively, an air pocket might have formed in the filter; increase the distance between the filter and the water level. Also, check for any leaks and stop them.
Covers precautions to prevent electric shocks during device operation and maintenance.
Advises against children playing with packaging and ensures cable safety.
Highlights risks of running the pump dry and handling the connection cable.
Explains how to switch the device on by plugging it in and off by unplugging.
Details the function of shut-off levers, stopcocks, and the start button.
General| Brand | Tetra |
|---|---|
| Model | EX 1000 Plus |
| Category | Water Filtration Systems |
| Language | English |
