Need help?Do you have a question about the Tetra IN 1000 plus and is the answer not in the manual?
Attach suction cups to mounting unit and air intake tube to venturi air intake before installation.
Attach filter to aquarium glass, ensuring diffuser is max 1 cm below surface. Plug in to start.
Turn adjuster clockwise to increase flow, counterclockwise to decrease flow.
Turn adjuster towards back to increase air flow, towards front to decrease air flow.
Rotate nozzle up to 180° to suit aquarium environment and fish requirements.
Disconnect power. Remove cartridge, clean foam in aquarium water, replace when needed.
Clean impeller unit each time foam filter media is cleaned or replaced. Do not use abrasive agents.
General| Internal | Yes |
|---|---|
| Aquarium capacity (max) | 200 L |
| Aquarium capacity (min) | 120 L |
| Number of filter chambers | 2 |
To Next Page
