EasyManuals Logo

Tetra Whisper 10i Instructions, Safeguards & Warranty

Tetra Whisper 10i
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Tetra
®
3001 Commerce Street
Blacksburg, VA
24060-6671 EE.UU.
www.tetra-fish.com
®Registered Trademark of United Pet Group, Inc.,or one of its subsidiaries.
®Marque déposée de United Pet Group, Inc., ou de l’une de ses filiales.
®Marca registrada de United Pet Group, Inc., o de una de sus subsidiarias.
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW
ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
DANGER
Special care should be taken to avoid possible electric shock, since water is employed in the
use of aquarium equipment. Do not attempt any repairs by yourself; return the appliance to
an authorized service facility for service or discard the appliance.
WARNING
To guard against injury, observe basic safety precautions, including the following:
1. If the appliance shows any sign of abnormal water leakage, immediately unplug it from
the power source.
2. Carefully examine the appliance after installation. Unplug the appliance if there is water
on parts not intended to get wet.
3. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning,
or if it has been dropped or damaged in any manner.
4. To avoid getting the appliance plug or receptacle wet,
position the aquarium to the side of a wall-mounted
outlet in order to prevent water from dripping onto the
plug or outlet. Arrange a “drip loop” for each cord
connecting an aquarium appliance to an outlet.
(See Illustration A.) The “drip loop” is the part of
the cord below the level of the outlet (or if using an
extension cord, below the level of the connector)
that prevents water from traveling along the cord
and coming in contact with the outlet.
5. If the plug or outlet should get wet, don’t unplug the
cord. Disconnect the fuse or circuit breaker that supplies power to the appliance.
Once the power has been disconnected, unplug the cord and examine it for the presence
of water in the outlet.
6. Always unplug the appliance from an outlet when it is not in use. Also unplug it before
cleaning, and prior to disconnecting or attaching parts. Never yank the cord to pull the
plug from the outlet. Grasp the plug and pull to disconnect.
7. Do not use an appliance for anything other than its intended use. Do not use attachments
that are not recommended or sold by the manufacturer; they may cause an unsafe condition.
8. Do not install or store the appliance where it will be exposed to the weather or to
temperatures below freezing.
9. Make sure the appliance is securely installed before operating it.
10. If an extension cord is necessary, use a cord with a rating that matches or exceeds the
rating of the appliance. A cord rated for fewer amperes or watts than the appliance rating
may overheat. Arrange the cord so that it will not trip anybody, and that it will not be
pulled in any way.
11. This appliance has a polarized plug (one blade is wider than the other). As a safety feature,
this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. Do not attempt to defeat this
safety feature.
12. To avoid injury, do not touch moving parts.
13. Supervise children closely when they are near or using the appliance.
Illustration A
Drip Loop
115 Volts 60 Hz
INSTRUCTIONS, SAFEGUARDS & WARRANTY
INSTRUCTIONS, MISES EN GARDE ET GARANTIEv
INSTRUCCIONES, NORMAS DE SEGURIDAD Y GARANTÍA
INTERNAL FILTER
FILTRE INTERNE
FILTRO INTERIOR
®
Whisper 10i
Whisper 20i
Whisper 40i
25816-901 REV. B

Other manuals for Tetra Whisper 10i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tetra Whisper 10i and is the answer not in the manual?

Tetra Whisper 10i Specifications

General IconGeneral
BrandTetra
ModelWhisper 10i
CategoryWater Filtration Systems
LanguageEnglish

Related product manuals