Why is my Teufel Subwoofer playback noisy?
Noisy playback from your Teufel Subwoofer can occur if the audio cable connecting your AV receiver and subwoofer is too long or lacks sufficient shielding. To resolve this, try using a shorter, well-shielded RCA cable. Alternatively, consider using a wireless connection if available.
What to do if Teufel T 1108/1SW Subwoofer transmission is disrupted?
If the transmission to your Teufel Subwoofer is disrupted, it might be due to interference from other wireless devices like cordless phones, Wi-Fi stations, or microwaves. Try moving these devices away from the subwoofer to see if it resolves the issue.
How to make Teufel T 1108/1SW Subwoofer turn off automatically?
To enable the automatic turn-off feature on your Teufel Subwoofer, ensure that the POWER switch is set to “AUTO”. This setting allows the subwoofer to automatically power down when not in use.
What to do if POWER LED of Teufel T 1108/1SW does not illuminate?
If the POWER LED on your Teufel Subwoofer isn't lighting up, the first step is to ensure that the subwoofer is receiving power. Check that the mains cord is securely connected to both the subwoofer and the power outlet.
General| Type | Active subwoofer |
|---|---|
| Driver Size | 8 inches |
| Housing Material | MDF |
| Power Output (Peak) | 200 W |
| Frequency Response | 30 - 200 Hz |
| Frequency Response (Alternative) | 30 - 200 Hz |
| Crossover Frequency | 50 - 150 Hz |
| Inputs | RCA |
To Next Page
