Helpline No. UK/Northern Ireland 01270 508538 Rep.Ireland 1800 995 036
Web Support www.quesh.co.uk
Model No: 44163
11
3. PROG
Press PROG key, the screen will show the program menu. The machine
can program a sequence of 16 tracks (VCD/CD/MP3) or chapters (DVD).
After entering the PROG menu, the cursor will stay at NO.1. Input the track
(VCD/CD/MP3) or chapter (DVD) number that you want to play first by
pressing the numeric key (0-9). Then press the direction key to move the
cursor to position NO.2, the operation is the same as above. If you make a
mistake or if you want to change the order of the program, you can move
the cursor to the place that you want to start the program playing. Press
STOP to exit the PROG picture, then press the PLAY key to play normally.
When Playing JPEG files, press PROG key to select the picture display
mode.
Note : in the program playing state, DVD discs do not have the repeat
function. Some discs also do not have the program-playing function.
4. A-B REPEAT
A-B repeat function lets you set your favourite scenes for instant repeat.
1. Press the key at the point where you want the repeat to start.
2. Press the key again at the point you want to repeat, then the function
…..will play only the point between A and B.
3. Press the button again to cancel the repeat section.
5. REPEAT
If the REPEAT key is pressed when the machine is playing, the track will
repeat, if you want the whole program to repeat, press the REPEAT key
again.
6. GOTO
The GOTO button allows you to move to the place of your choice. After
pressing the GOTO button enter the track, and title of the chapter
required using the number keypad. Or enter the exact hours, minutes and
seconds corresponding to the place where you wish to start playback.
To Next Page
Loading...
