Helpline No. UK/Northern Ireland 01270 508538 Rep.Ireland 1800 995 036
Web Support www.quesh.co.uk
Model No: 44163
18
If your TV only has a VIDEO input socket ( yellow ) socket, please
connect the System’s VIDEO output socket and the TV’s VIDEO input
socket with a video cable.
If your TV has a Y,Cb,Cr input socket, please use a Y,Cb,Cr port cable
(not supplied) to connect this system’s Y,Cb,Cr output socket with the
TV’s Y,Cb,Cr input socket to get a higher quality picture. When setting
the system, please set the VIDEO output format to Y,Cb,Cr output.
In order to route the sound back through your TV rather than the
speakers simply attach an audio cable from the audio out of the HIFI to
the audio in on your TV.
Playing a DVD
1. In order to play a DVD first make sure that you are in DVD mode by
pressing the INPUT button on the remote.
2. Press the OPEN/CLOSE button either on the remote or on the front
of the unit to open the disc tray.
3. Place the DVD onto the tray making sure that the shiny side is
facing down.
4. Press the OPEN/CLOSE button again to close the tray. The DVD will
now automatically load to the main menu of the DVD.
5. Use the directional arrow buttons on the remote to navigate
through the menu options and press the enter button to confirm.
To Next Page
Loading...
