•
Make sure not to damage the diagnosis connectors when connecting
and disconnecting the device.
The tool is designed to be electrically safe and to work
with specific power supply voltage levels.
Failure to comply with the specifications on the power
supply may compromise the tool's efficiency.
Safety Measures:
•
Do not wet the device with water or other liquids.
•
If not otherwise specified, use the tool on vehicles with a 12V DC power
supply and chassis connected to the negative pole.
•
Do not use external batteries to supply the tool unless explicitly
requested to do so by the software.
The electromagnetic compatibility tests carried out on
the device guarantee that it can be adapted to the
technologies normally used on vehicles (ex.: engine
control, ABS, airbag, etc.). Nevertheless, if malfunctions
occur you should contact the vehicle dealer.
19
en
To Next Page
Loading...
