TI CC2540 Bluetooth low energy Sample Applications Guide v1.4.1 SWRU297 Version 1.4.1
Page 34 of 36
Copyright © 2011-2015 Texas Instruments, Inc
19.3 Server Requirements
The installer includes a server application compatible with the SBL Tool which runs on the
SmartRF board. The project allows the user to connect load an image over the serial port, and
then transfer it over the air to the target.
This example server application is located at:
C:\Texas Instruments\BLE-CC254x-
1.4.1\Projects\ble\OADManager\CC2541DB\OADManager.eww
In addition, other servers can be used such as a phone with BLE support or a PC. For PC
support, there is dev monitor application which can be found on TI CC2541 product page.
http://www.ti.com/product/cc2541
For iOS, there is a sensorTag application which performs OAD. For more information visit the
SensorTag wiki
http://processors.wiki.ti.com/index.php/SensorTag_User_Guide
To Next Page
Loading...
Need help?
General
