Texas Instruments TI-Nspire CAS User Manual

108 Alphabetical Listing
Loop
Catalog >
Loop
Block
EndLoop
Repeatedly executes the statements in
Block. Note that the loop will be executed
endlessly, unless a Goto or Exit instruction
is executed within Block.
Block is a sequence of statements
separated with the “:” character.
Note for entering the example: For
instructions on entering multi-line program
and function definitions, refer to the
Calculator section of your product
guidebook.
LU
Catalog >
LU Matrix, lMatrix, uMatrix, pMatrix
[,Tol]
Calculates the Doolittle LU (lower-upper)
decomposition of a real or complex matrix.
The lower triangular matrix is stored in
lMatrix, the upper triangular matrix in
uMatrix, and the permutation matrix
(which describes the row swaps done
during the calculation) in pMatrix.
lMatrix•uMatrix = pMatrix•matrix
Optionally, any matrix element is treated as
zero if its absolute value is less than Tol.
This tolerance is used only if the matrix has
floating-point entries and does not contain
any symbolic variables that have not been
assigned a value. Otherwise, Tol is ignored.
• If you use /· or set the Auto or
Approximate mode to Approximate,
computations are done using floating-
point arithmetic.
• If Tol is omitted or not used, the default
tolerance is calculated as:
5E⁻14•max(dim(Matrix))•rowNorm
(Matrix)

Texas Instruments TI-Nspire CAS Specifications

General

Type	Graphing
Cover	-
Form factor	Pocket
Control type	Buttons, Touch
Product color	Grey, Silver
Digits	- digits
Display tilting	No
Display resolution	320 x 240 pixels
Display number of lines	- lines
Compatible operating systems	Windows XP/2000\\r Mac OS X 10.4/10.5
Battery type	AAA
Power source	Battery
Number of batteries supported	4
USB port	Yes
USB 2.0 ports quantity	1
RAM capacity	16 MB
ROM capacity	20 MB

Weight and Dimensions

Depth	198.3 mm
Width	100 mm
Height	28.7 mm