Texas Instruments TI-Nspire CAS User Manual

►Base10
Catalog >
Note: You can insert this operator from the
computer keyboard by typing @>Base10.
Converts Integer1 to a decimal (base10)
number. A binary or hexadecimal entry
must always have a 0b or 0h prefix,
respectively.
0b binaryNumber
0h hexadecimalNumber
Zero, not the letter O, followed by b or h.
A binary number can have up to 64 digits. A
hexadecimal number can have up to 16.
Without a prefix, Integer1 is treated as
decimal. The result is displayed in decimal,
regardless of the Base mode.
►Base16
Catalog >
Integer1 ►Base16 ⇒ integer
Note: You can insert this operator from the
computer keyboard by typing @>Base16.
Converts Integer1 to a hexadecimal
number. Binary or hexadecimal numbers
always have a 0b or 0h prefix, respectively.
0b binaryNumber
0h hexadecimalNumber
Zero, not the letter O, followed by b or h.
A binary number can have up to 64 digits. A
hexadecimal number can have up to 16.
Without a prefix, Integer1 is treated as
decimal (base10). The result is displayed in
hexadecimal, regardless of the Base mode.
If you enter a decimal integer that is too
large for a signed, 64-bit binary form, a
symmetric modulo operation is used to
bring the value into the appropriate range.
For more information, see ►Base2, page
21.
Alphabetical Listing 23

Texas Instruments TI-Nspire CAS Specifications

General

Type	Graphing
Cover	-
Form factor	Pocket
Control type	Buttons, Touch
Product color	Grey, Silver
Digits	- digits
Display tilting	No
Display resolution	320 x 240 pixels
Display number of lines	- lines
Compatible operating systems	Windows XP/2000\\r Mac OS X 10.4/10.5
Battery type	AAA
Power source	Battery
Number of batteries supported	4
USB port	Yes
USB 2.0 ports quantity	1
RAM capacity	16 MB
ROM capacity	20 MB

Weight and Dimensions

Depth	198.3 mm
Width	100 mm
Height	28.7 mm