2. Press 1 to select the custom split option.
The standard layout is displayed with a divider between the application panes. Use
the arrows ( ) in the middle of the divider to adjust the size of the panes.
3. Press £,¤,¡or¢ to move the divider to adjust the height or width of the panes in
the layout.
4. Press + or - to select a defined layout:
• Pressing - returns to a full page layout.
• Pressing + once switches layout from a vertical layout to a horizontal layout.
Press - to go back to a vertical layout.
• Pressing + twice adds a third pane to the page. Pressing + multiple times
enables you to choose between a vertical and horizontal page layout with three
panes.
• Pressing + five times adds a fourth pane to the page. Press - to cycle
through the previous layout options.
Working with Documents on TI-Nspire™ CX II Handhelds 33
To Next Page
Loading...
