™
© 2012 Texas Instruments Educaon Technology Page 7
The TI-Nspire™ CX handheld comes with a rechargeable baery, which should be charged for at least six hours
before rst use. The built-in rechargeable baery does not need to be removed from the handheld in order to
recharge it. The handheld will sll work and can be used while it is charging.
With use of 2 hours per day at the default brightness level the baery should last for up to 10 days.
The handheld comes with the following cables:
• Standard mini-A to mini-B USB cable for transferring les between handhelds
• Standard A to mini-B USB cable for transferring les to and from a computer and for charging the baery via
the USB port
To charge the baery in the TI-Nspire™CX handheld:
• Connect the handheld to a computer using a standard A to mini-B USB cable. If the driver is not found when
the handheld is connected to the computer download the soware that includes a driver from
.
OR
• Connect to a wall outlet using a TI wall adapter (sold separately).
OR
• Place the handheld or mulple handhelds in a TI-Nspire™ CX Docking Staon.
To Next Page
Loading...
Need help?
General
