www.ti.com
Monitoring, Re-configuring and Re-tuning with Designer GUI
14.4 Feedback Control Loop Tuning and Re-Tuning with GUI
After click the tab of Designer, the page is shown as in Figure 46. In the UCD3138PFCEVM-026, this
page is dedicated to the feedback loop design. This page including two sub-pages. One is for the current
loop PID coefficients and the other is for the voltage feedback loop which uses PI control.
Figure 46. Page of Designer
51
SLUU885B–March 2012–Revised July 2012 Digitally Controlled Single-Phase PFC Pre-Regulator
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated