Texecom CEL-0007 User Manual

25
Press /
Press  or use the  to select the Texecom Connect Protocol.
Press 
Press

/


Press / 3 times then /
NOTE: The panel will now make several changes to its programming, populating all of the correct information to allow Texecom
Connect to function properly. The following items are automatically programmed. The IP address and port number for the primary
and secondary Telephone numbers may differ from what is shown.
• ARC Pri No. (set as 127.0.0.251)
• Dialing Attempts (set as 9) Report Areas
• Config 1 (Protocol Options) Config 2 (Protocol Options 2) IP Polling Time
• Onboard Digi Com
• Enable Communicator and Dial all Numbers enabled

Texecom CEL-0007 Specifications

General

Brand	Texecom
Model	CEL-0007
Category	Cell Phone
Language	English