Texecom CEL-0007 - Generate an App code

26
Generate an App code
Enter

*This option will only appear when an ARC has the Texecom Connect
Protocol enabled. If you don’t see this screen please follow the previous
steps and select Texecom Connect as the protocol for your chosen
ARC.
Press

/

The panel will now establish communication with the Connect Server. A
successful call will result in an app code being generated and displayed
on the keypad.
Press 
Press /
Press

Press

/

3 times then

/

SmartCom how to default to factory settings
To default SmartCom:
• Remove SmartCom cover to create a tamper condition.
• Press the Wi-Fi button 5 times within 3 seconds.
• All four LEDs will flash for 10 seconds and then the SmartCom will reboot into a default state.