Premier 48, 88, 168 & 640 Installation Manual Quick Reference Guide
INS176 105
Global Options
System Timers Use
to select a timer,
-
to enter a value,
to accept
01: Exit Settle Time
13: Pulse Period 2
25: Zone Response
02: Global Bell Dly.
14: Pulse Period 3
26: Keypad PA Delay
03: Global Bell Dur.
15: ATS Fault Delay
27: Confirmation Dly
04: Double Knock Dly
16: AC Off Delay 28: Warning Delay
05: Beam Pair Time
17: Batt Test Period 29: Keypad Lock Time
06: Activity Delay
18: Batt Test Time 30: Eng. Log Off Dly
07: Abort Delay
19: Soak Test Time 31: Fire Bell Delay
08: Courtesy Time
20: Service Interval 32: Forced Entry Dly
09: Defer Arming By
21: Test Call Every 33: Supervision Time
10: Auto Arm Delay
22: Min Random Time 34: Poll IP Every
11: Menu Time Out
23: Max Random Time
12: Pulse Period 1
24: Door Strike Time
System Config.
Use
to select an option,
to change the option,
to accept
00: (No Bell/Bell on) Arm Fail
20: (Predictive/Normal) Text
01: Bell is an (SAB/SCB)
21: Zone Short=(Active/Tamper)
02: Clock is (12Hr/24Hr)
22: R/R=(Reset Only/Silence/RST)
03: (Manual/Auto) BST/GMT
23: User Codes (Pulse/Latch)
04: (Hide/View) Armed Areas
24: Test Call = (Timed/Timed)
05: (Area/Global) Bell Time
25: Batt Test = (Timed/Disarm)
06: 24Hr Omit (Global/Local)
26: Bell = (1
st
Alarm/2
nd
Alarm)
07: (Leave/Remove) Omits
27: SNDR = (1
st
Alarm/2
nd
Alarm)
08: Away (Override/Enforce) Delay 28: Conf. = (Instant/Delayed)
09: NVM is (Unlocked/Locked)
29: Abort = (Eng. Reset/User Reset)
10: Engineer (Only/+ User)
30: (Auto/Manual) AV Outputs
11: Chime (Audible/Visible)
31: Clock = (50Hz/Crystal)
12: Omit Tampers (NO/YES)
32: (40/80) Column Printer
13: (Offline/Online) Printing 33: (Enable/Disable) Text
14: Activity Fault (View/Hide) 34: EN50131 (Disabled/Enabled)
15: (Hide/View) Exit Errors 34: (2
nd
Zone /1
st
Zone) = Confirm
16: (No/Enable) Code Tampers 35: (Global/Local) Keypads
17: Code Tamp (Alarms/Locks) 36: Panel Grade (2/3)
18: Areas (1-8/A-H) & I-P 37: (Enable/Disable) RF FOB PA
19: (Auto/Manual) Area Select 38: Mask=(Fault/Alarm)
System Options
Use
to select an Option,
-
to enter a value,
to accept
1: Advisory Volume
4:
Anti-code Resets 7: Quick Count
2: Chime Volume
5:
Multiple Knocks 8: Modem Level
3:
Number Of Re-Arms
6: Modem Levels
Monitor Hardware
Press
to edit,
to select an option,
to change the option,
to accept
F = Aux Fuse Blown
L = Panel Lid
Control Timers Use to select an area,
-
to enter the 1
st
On time,
to accept
Use
-
to select the 1
st
On time days of operation,
to accept
Use
-
to enter the 1
st
Off time,
to accept
Use
-
to select the 1
st
Off time days of operation,
to accept
System Text Use
to select a message,
-
to select characters (press the required key the
appropriate number of times),
to accept
Part Arm Text Use
to select a Part Arm,
to edit the Part Arm text,
-
to select characters
(press the required key the appropriate number of times),
to accept
Holiday Dates Use
to select a holiday date,
-
to enter the required date
(
),
to accept
Speaker Tones Use
to select a tone type,
to turn the tone on/off,
to accept
PC Output Text Use
to select an Output,
to edit,
-
to select characters (press the required
key the appropriate number of times),
to accept
Custom O/P Text Use
to select an Output,
to edit,
-
to select characters (press the required
key the appropriate number of times),
to accept
To Next Page
Loading...
