[2]
Safety Precautions
Danger
Install
!!!
!!!
!!!
!!!
!!!
!!!
!!!
!!!
!!!
!!!
!!!
After closing the power switch and unplugging the power plug from the socket, wait for at least 5 minutes
before opening the control box cover. Touching areas with high voltage can cause casualties.
No liquid is allowed to enter the sewing machine, otherwise it will cause fire, electric shock and operation
failure.
Use Environment
Please don't use in the environment with strong electrical
interference sources such as power line interference and
elec trostatic interference.
Strong electrical interference sources may affect the correct
operation of sewing machines.
The fluctuation of power supply voltage should be used in
the environment of rated voltage less than ±10%.
The large fluctuation of voltage will affect the correct
operation of sewing machine.
The power supply capacity should be greater than the
power consumption of the sewing machine. Insufficient
power supply capacity will affect the correct operation of
sewing machine.
Warning
Be Careful
If any liquid enters the sewing machine (head or control box), turn o ffthe power supply immediately, pull
the plug out of the socket, and contact the vendor or senior technicians.
The ambient temperature should be used in the range of
5-35 degrees Celsius.
Low or high temperature will affect the correct operation of
sewing machine.
Relative humidity should be in the range of 45% - 85%, and
the equipment will not form condensation environment. Dry
or wet environment and dew will affect the correct
operation of sewing machine.
In case of thunderstorm, turn off the power switch and pull
the power plug off the socket. Lightning may affect the
correct operation of sewing machine.
Do not connect devices other than USB memory to USB
connection ports. Otherwise, it may lead to failure.
Ask trained technicians to install sewing machines.
Please commission the purchase shop or electrical
professionals for electrical wiring.
The sewing machine weighs about 38Kg. Installation must
be completed by more than two people.
Please do not connect the power supply before the
installation is completed. If you step on the pedal by
mistake, the sewing machine will cause injury.
Please unplug the plug after cutting of f the power supply.
Otherwise, it will easily become the cause of the failure of
the control box.
It must be grounded.
Insufficient ground connection is the cause of electric shock
or misoperation.
When fixing the cable, do not bend the cable excessively
or fix it too tightly with clamps, which may cause fire or
electric shock.
If a worktable with casters is used, the casters should be
fixed so that they cannot move.
When the head of the sewing machine falls down, please
make sure that the worktable is fixed and not moved at will.
Accidents such as foot clamping have occurred in the
movement of worktable, which is the cause of personal
accidents.
When the sewing machine head falls down or stands up, ple
ase operate with both hands.
One-handed operation can easily cause injury if the weight of
the sewing machine slips.
When lubricating oil and butter are used, it is necessary to
wear protective glasses and gloves to prevent lubricating oil
from falling into serious or sticking to the skin, which is the
cause of inflammation.
In addition, lubricants or butter should not be drunk,
otherwise vomiting and diarrhea will occur.
Keep oil out of reach of children
To Next Page
Loading...
Need help?
General
