Need help?Do you have a question about the Texi Forte UF and is the answer not in the manual?
General| Type | Overlock |
|---|---|
| Number of threads | 4 |
| Differential feed ratio | 0.7 - 2.0 |
| Stitch Length | 1 - 4 mm |
| Buttonhole | No |
| Stitch Types | Rolled hem |
| Presser Feet | Standard |
This machine conforms to European regulations and requires adherence to all applicable legal and safety standards.
Operate machine only after reading manual and by trained personnel. Follow all safety instructions on machine and manual.
Explains danger and caution symbols used in the manual and on the machine to highlight potential hazards.
Manual is integral part of machine. Users must read manual before first use and be instructed on safety features and methods.
Defines responsibilities and safety obligations for operating personnel and specialist technical staff.
Details responsibilities for operation, cleaning, and problem-solving, emphasizing safety adherence and reporting.
Outlines duties for trained personnel in electrics, electronics, and mechanics for maintenance and repairs.
Highlights specific hazards such as moving parts, needles, belts, and crushing risks, requiring safe operating practices.
Provides technical specifications for the Texi HD Forte UF sewing machine, including stitch type, needle system, and dimensions.
Lists maximum stitches per minute based on different top feed lift and stitch length settings.
Specifies that machines are delivered completely packed for safe transport to the customer.
Manufacturer not liable for internal transport; ensure upright position and secure movement.
Details packing materials used and states that their proper disposal is the customer's responsibility.
Provides guidelines for storing the machine, including protection against dust, moisture, and corrosion for longer periods.
Describes the function of the sewing machine pedal for controlling machine stop, sewing, and needle bar movement.
Explains the operation of the lever used to lift or lower the presser foot during sewing.
Details how to adjust stitch length using a knurled nut and how to engage reverse sewing.
Explains how to adjust the top-feed stroke using a specific nut, with a safety warning.
Covers site requirements for electric current, a firm horizontal surface, and adequate lighting for machine installation.
Provides instructions on how to adjust the table-top height using screws and pedal position.
Details the steps for mounting the upper V-belt guard, including a note about large balance wheels.
Instructions on how to push the synchronizer onto the shaft and tighten screws securely.
Describes how to fit the reel stand and secure it to the table top with provided nuts.
Step-by-step guide for inserting the needle correctly, ensuring proper orientation and tightening.
Instructions for winding bobbin thread, setting winder tension, and handling uneven winding.
Guidance on removing and inserting the bobbin case, including safety precautions.
Procedure for threading the bobbin and adjusting its thread tension using a screw.
Instructions for threading the needle thread and adjusting its tension.
Provides a schedule for routine servicing tasks like cleaning and lubrication based on machine usage.
Detailed steps for cleaning the hook area, hook thoroughly, and related parts, with safety warnings.
Instructions for lubricating various bearings and parts of the machine, with safety precautions.
Guide for lubricating bearings and moving parts within the machine head.
Instructions on greasing the top-feed drive eccentric using a grease gun.
General guidance for performing adjustments, emphasizing expert staff involvement and prerequisite checks.
Lists necessary tools, gauges, and accessories required for performing machine adjustments.
Defines common abbreviations used in the adjustment section, such as t.d.c. and b.d.c.
Explains symbols used in the adjustment manual for operations and important information.
Covers fundamental adjustments to ensure the machine operates correctly.
Adjusts the lateral position of the bottom feed dog relative to the needle plate cutout.
Sets the feed dog's forward and backward clearance within the needle plate cutout.
Adjusts the protrusion height of the bottom feed dog over the needle plate at TDC.
Sets the initial vertical position of the needle bar relative to the needle plate at BDC.
Ensures the needle enters the needle hole precisely in the middle at stitch length zero.
Adjusts the bottom feed dog's lifting motion to meet specific timing and height requirements.
Ensures proper feed dog movement, particularly when the reverse-feed lever is activated.
Critical adjustments for hook-to-needle clearance, needle rise, height, and guard contact.
Sets the lift height of the presser foot and vibrating presser foot at the top-feed stroke.
Adjusts the timing for the top feed and needle to reach the needle plate simultaneously.
Ensures the needle thread is not clamped by the bobbin-case opener or related parts.
Describes the function of the safety clutch for preventing hook damage during thread jams.
Adjusts the spacing of tension discs when the presser foot is raised.
Sets the thread check spring movement to finish when the needle enters the material.
Adjusts bobbin winder engagement, friction wheel clearance, and automatic shut-off.
Adjusts presser foot pressure for reliable material feeding without leaving marks.
To Next Page
