Need help?Do you have a question about the Texi Tronic 1 and is the answer not in the manual?
General| Brand | Texi |
|---|---|
| Model | Tronic 1 |
| Category | Sewing Machine |
| Language | English |
Guidelines for safe workplace, environment, and personal conduct during machine operation.
Ensuring safe electrical connections and compliance with safety norms.
Safety measures before starting work, including guards and avoiding moving parts.
Introduction to the Tronic 1 lockstitch machine and its intended application.
User responsibilities and actions before commencing sewing operations.
Detailed specifications including power, speed, dimensions, and materials.
Step-by-step guide for attaching the oil reservoir to the machine table.
Procedures for filling the oil reservoir and monitoring oil levels during use.
Methods for checking oil levels during initial startup and regular operation.
Procedure for verifying and adjusting oil dispensed to the hook for optimal performance.
Instructions for correctly inserting and tightening the needle into the needle holder.
Steps for placing the bobbin correctly into the bobbin case.
Guidance on winding thread onto the bobbin using the machine's winder.
Detailed steps for threading the sewing machine from the spool to the needle.
How to set and modify stitch length using the regulation dial and reverse lever.
Instructions for assembling and mounting the thread stand on the machine table.
Procedure for adjusting the presser foot lifting height using the knee lifter.
Explanation of the four operational stages of the sewing machine pedal.
Methods for adjusting tension for both the upper and bobbin threads.
How to adjust the stroke and tension of the compensating spring.
Instructions for using the manual lifter to raise or lower the presser foot.
Procedure for setting the pressure of the presser foot for different fabrics.
How to adjust the eccentric cam for optimal synchronization and material feeding.
Procedure for adjusting the feed dog height for various material weights.
How to tilt the feed dog and the importance of re-checking height.
Steps for aligning the needle bar and hook for correct stitch formation.
How to adjust the height and angle of the presser foot bar.
Adjusting the thread guide for optimal thread pull on different fabrics.
How to modify pedal pressing force and set return force.
Setting pedal angle and aligning the pedal with the motor control lever.
Guidance on selecting needles based on material type.
Information on specific lubricating oils for textile machines.
Reference to tweezers as a necessary tool.
Information about the product distributor.
Statement confirming product compliance with EU directives and norms.
To Next Page
