Need help?Do you have a question about the Texi Tronic 5 and is the answer not in the manual?
General| Brand | Texi |
|---|---|
| Model | Tronic 5 |
| Category | Sewing Machine |
| Language | English |
Work related to electrical installation must be performed by a qualified electrician, observing safety standards.
Maintain a clean, well-lit workplace. Avoid loose clothing and unauthorized persons near the machine.
Essential checks and safety procedures to perform before operating the machine.
Instructions for installing the oil reservoir, machine head, and performing lubrication.
Procedure for adjusting oil dosage delivered to the hook and understanding oil levels.
Selecting, installing, and checking the needle, loading bobbin, and threading the machine.
Procedure for winding the bobbin and adjusting stitch length.
Assembling the thread stand and securing it, including power cable management.
Procedure for removing counter and moving knives, with a crucial needle removal precaution.
Adjusting thread cutter cam and knife positions for optimal thread cutting.
Adjusting presser foot lift and understanding pedal stages for speed and control.
Adjusting thread tension, compensating spring, and manual foot lifter.
Regulating foot pressure, adjusting feed timing, and tilting the feed dog.
Adjusting feed dog height and synchronizing needle bar and hook.
Adjusting foot bar height and angle, and securing the settings.
Adjusting thread guide and setting the needle stop position.
Adjusting pedal pressing force and regulating pedal angle and tension rod.
Using the switch to activate reverse feed stitching and adjusting switch height.
Lists model, application, power supply, speed, stitch length, and other key technical data.
Details of the distributor, Strima Sp. z o.o., and their location.
Declaration of compliance for the Tronic 5 machine with relevant EU directives.
To Next Page
