7
TEXI Tronic 5 operation manual
8. Winding the bobbin
Set the bobbin on to the bobbin winder and wind the
thread onto the bobbin as shown on the figure .
9. Stitch length regulation
1. Turn the stitch length regulation dial [1] in the di-
rection of the arrow and set the desired value at
indicator A on the machine arm.
2. The dial has millimeter gradation.
3. In order to decrease stitch length, turn the dial [1]
while pressing the reverse sewing lever [2] in the
direction of the arrow.
10. Installing the thread stand
1. Assemble the thread stand and insert it into the
opening in the top of the machine.
2. Fasten the fixing nut [1] to secure the stand.
3. If you have ceiling cabling, you can lead the power
supply cable through the thread stand bar [2].
To Next Page
Loading...
