16
TEXI Tronic 5 operation manual
28. Automatic reverse feed stitching mechanism
1. Using the mechanism:
1) After pressing switch [1] the machine immediately goes
into reverse feed stitching mode.
2) The machine sews in the reverse direction as long as the
switch is activated.
3) When the switch is released, the machine goes back to
regular sewing.
2. Switch height
1) Set switch [1] height so that it is easy to use.
2) Loosen screw [2] and slide the switch up or down, adjust-
ing its height as appropriate.
To Next Page
Loading...
