Texi Black&White User Manual

EN
Select a needle of the right type and size for the
fabric to be sewn.
CAUTION: Turn o the power before removing
theneedle.
1. Turn the handwheel toward you until the
needle is at its highest point.
2. Loosen the needle clamp screw.
3. Remove the needle.
4. Insert new needle into needle clamp with at
side to the back and push it up as far as it will
go.
5. Tighten the needle clamp screw.
NOTE: Do not use bent or blunt needles. Place
needle on a at surface and check to see if bent.
The thread tension must be properly balanced. If adjustment is required, it can be
made by changing the upper thread tension. Correct thread tension: upper and
bobbin threads should interlock in the middle of fabric.
INSERTING THE NEEDLE
ADJUSTING THE THREAD TENSION
Flat side
Flat side toward the back
Needle
Texi Black&White 91
Texi Black&White INSTRUKCJA 2018.indb 91 11.04.2018 16:28

Texi Black&White Specifications

General

Brand	Texi
Model	Black&White
Category	Sewing Machine
Language	English