OBSERVE THIS SAFETY PRECAUTIONS
- To prevents accidents, do not remove safety or parts while operating the machine.
- Do not leave tools or other unnecessary objects the machine table while operating the machine.
- Before maintenance, adjusting, cleaning, thread ionrg replacing the needle, and to prevent accidents, be sure the
power is off. Check that the machine will not operate when the pedal is pressed.
- Turn the power off before leaving the machine’s table.
- In the event of power failure, be sure to turn machine off.
- Check that the machine is securely grounded.
NOTE:
In case a crutch motor is used, it will keep on rotating by inertia after turning off the power supply (1). If the machine’s
pedal (2) is stepped on inadvertently, it is dangerous because the machine will move unexpectedly. Keep on stepping on
the machine’s pedal (2) until the machine comes to a stop after turning off power supply.
devices
on
the
4
TEXI Tre 04 T, Quattro 24 T, Cinque 35 T Operation Manual
To Next Page
Loading...
Need help?
General
