14
0258
Call Switch Operation
The call switch on the VIP switch panel allows the VIP seat passenger to contact the
cockpit crew.
To contact the cockpit crew:
1. From the VIP switch main menu, press the button below “CALL.”
Press Button to Call
Cockpit
(“**” Appears on Screen
when Pressed)
To receive incoming call:
1. When an incoming call needs attention, the center text of the VIP switch panel
is replaced by a “” symbol.
2. Take AirCell handset from holder.
3. Press “SND” to connect to incoming call.
4. When call is finished, press “END” to disconnect.
Data Panel Operation
The data panel is used for data transmission and reception through the
RS-232 connector. Plug the cord from the input/output device to the RS-232
connector on the data panel. For detailed operation instructions, see the user manual
of the type of equipment connected to the data panel.
RS-232 Connector
To Next Page
Loading...
