27
0258
Vanity Water Tank
Vanity
Vanity Switch Panel
Soap Dispenser
Water Faucet Control
Note: Water will continue to run a few seconds after water faucet is turned off.
110V Outlet
Vanity Switch Panel
(Located left of the Vanity)
Vanity Water Heater Operation
The vanity switch panel or master control switch panel vanity menu may be used to
control the temperature of the heater for the vanity water tank. Press the button
below “HOT WATER” for the desired temperature setting. Water tank will take several
minutes to warm up.
Caution: Do NOT turn water tank heater on when tank is empty.
Press to Toggle
Vanity Water Tank Heater
Temperature Settings
(“High, Med, Low” Shows on
Screen, No Setting Shown
Indicates “Off”)
Lavatory Drain
Control
Accent
Light
To Next Page
Loading...
