USA 800-435-0786 Fax: 800-451-2632
815-397-7070 Fax: 815-397-1865
Canada 800-435-0786 Fax: 800-524-2853
International +1-815-397-7070 Fax: +1-815-397-9247
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070
An ISO 9001 Company
•
Greenlee Textron is a subsidiary of Textron Inc.
www.greenlee.com
Printed in USA
Installation
1. Remove the clevis pins from the line swivel.
2. Insert the items you want to attach into the clevis
ends. Re-assemble the clevis pins.
Maintenance
1. After each use, assess the condition of the swivel,
checking for wear and external damage. Check for
axial and radial play in the bearings.
2. Replace worn or bent clevis pins with original
equipment manufacturer’s pins. Replacement kits
consisting of two pins are available.
Replacement Pins
To achieve rated strength, always tighten attachment
pins firmly before placing these swivels under load.
THIS PRODUCT IS NOT SERVICEABLE. If swivel
ceases to operate correctly, replace with new one.
The only replacement/repair part on these swivels
are the attachment pins. Use only OEM pins. Do not
substitute.
UPC No. Replacement Use on
78-3310- Part No. Pin Swivel
39112 503 9112.7 00010-SLT 39106
39113 503 9113.5 00020-SLT 39107
39114 503 9114.3 00025-SLT 39108
39115 503 9115.1 00030-HEX 39109
39116 503 9116.0 00035-HEX 39110
39117 503 9117.8 00040-HEX 39111
To Previous Page
Loading...
