Textron GREENLEE 39106 User Manual

INSTRUCTION MANUAL
999 1430.1 © 2003 Greenlee Textron IM 1192 REV 1 10/03
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Swivels
Description
The Greenlee swivels, when used with a rope connector,
are intended for connecting the pull rope to the utility
product in an overhead or underground application.
The swivel permits rotation of the pull rope while protect-
ing the product from twisting.
• These swivels are not designed to run around bull
wheels.
• These swivels are not suitable for directional
drilling applications.
• These swivels are not intended for lifting appli-
cations.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for
Greenlee swivels.
Keep this manual available to all personnel.
Replacement manuals are available upon request at
no charge.

Textron GREENLEE 39106 Specifications

General

Brand	Textron
Model	GREENLEE 39106
Category	Tools
Language	English

Summary

Swivels Description and Purpose

Product Description

Greenlee swivels connect pull rope to utility product in overhead/underground applications, preventing rope twisting.

Purpose of this Manual

Familiarize personnel with safe operation and maintenance procedures for Greenlee swivels.

Important Safety Information

Safety Alert Symbol Definitions

Defines signal words DANGER, WARNING, CAUTION for hazards and unsafe practices.

General Safety Warnings

Includes preparation, safe working limits, component integrity, modification prohibition, and load limits.

Operating Specifications

Swivel Part Numbers and Dimensions

Table detailing part numbers, safe working limits (underground/overhead), dimensions (A-H), and net weight.

Working Limit Calculation

Underground limit uses 3:1 safety factor; Overhead limit uses 5:1 safety factor based on ultimate load.

Installation and Maintenance

Installation Procedure

Remove clevis pins, insert items, re-assemble pins. Tighten pins firmly before loading.

Maintenance and Replacement Parts

Check for wear, damage, and play. Replace worn pins with OEM parts. Product is not serviceable.