Need help?Do you have a question about the Textron EZGO 610987 and is the answer not in the manual?
Explains the manual's structure and how to use it for transaxle repair.
Defines warning symbols used in the manual for safety.
General safety precautions for working on vehicles and transaxles.
Details specific hazards like carbon monoxide and ignition system safety.
Lists necessary tools and provides cautions for disassembly.
Steps to remove the differential cover plate and associated hardware.
Procedure for removing axle shafts, bearings, and seals.
Steps to remove the input gear, retaining rings, and O-rings.
Process for removing differential-carrier, saddles, and drive gear.
Instructions for removing end plugs, retaining rings, and intermediate gear.
Emphasizes cleaning, work area, and general part replacement guidelines.
Procedures for inspecting oil seals and bearings for damage and wear.
Visual checks for contact on cover plate and wear on gear teeth.
Lists tools and provides critical precautions for reassembly.
Steps for lubricating and installing the intermediate gear assembly.
Procedure for installing the drive gear, differential-carrier, and saddles.
Instructions for installing O-rings, retaining rings, and input gear assembly.
Steps for installing axle shafts, hubs, and securing axle nuts.
Procedure for installing the differential cover plate and rubber plug.
Visual representation of transaxle components with numbering.
Detailed list of EZ-GO part numbers and descriptions for transaxle components.
To Next Page
General
