TRANSAXLE REASSEMBLY
Page C-6
Dana Electric Transaxle Shop Rebuild and Parts Manual
Differential Cover Plate Installation
Thoroughly inspect housing bolt threads for silicone
residue. Failure to properly clean the threads may
result in false torque readings and oil leakage.
Apply Permatex RTV to differential cover plate prior to installa-
tion.
1. Install differential cover plate using ten bolts.
Torque bolts in a cross pattern to 16 to 24 lb-ft (22
to 33 N•m).
2. Install rubber plug.
Fig. A-15 Bolts and Differential Cover Plate
Fig. A-16 Differential Cover Plate
To Next Page
Loading...
