EasyManua.ls Logo

Textron GREENLEE 7646 - Parts Lists; Hydraulic Punch Driver Parts Lists

Textron GREENLEE 7646
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Greenlee Textron / Subsidiary of Textron Inc.
7
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
Hydraulic Punch Driver
Cat. UPC NO.
KEY No. 78-3310- DESCRIPTION 7646 7306SB 7306 7310SB 7310 7625
7606SB 7610SB
7304 7506
A 746 17091 Ram (includes Keys B, C, D) 1 1 1 1 1 1 1 1
746SS 30387 Ram (includes Keys C, D and 29452) 1
29451 29451 7/16" Stainless Steel Draw Stud 1
29452 29452 3/4" Stainless Steel Draw Stud 1
B 2113AA 03294 3/4" Piston Shaft 1 1 1 1 1 1 1 1
C 54167 54167 1/4" Coupler Unit 1 1 1 1 1 2 2 2 1
D 54168 54168 Dust Plug 1 1 1 1 1 2 2 2 1
E 1557AA 03170 Screw Sleeve 1 1 1 1 1 1 1 1
F 1614SS 30043 3/8" Stainless Steel Adapter Screw 2 2 2 2 2 2 2 2
G 15908 15908 Spacer Group (includes Keys H, I, J) 1 1 1 1 1 1 1 1 1
H 1924AA 03248 Short Spacer 1 1 1 1 1 1 1 1 1
I 1925AA 03249 Medium Spacer 1 1 1 1 1 1 1 1 1
J 1926AA 06904 Long Spacer 1 1 1 1 1 1 1 1 1
K 34410 34410 Kwik-Stepper
®
Pilot Bit 1 1 1 1 1 1 1 1 1
L 767 13284 Hydraulic Hand Pump 1 1 1 1 1 1
M 38316 38316 1/4" x 3' High-Pressure Hose Unit
(includes Keys N, O) 1 1 1 1 1 1
N 54169 54169 1/4" Coupler Unit 1 1 1 1 1 2 2 2 1
O 54170 54170 Dust Cap 1 1 1 1 1 2 2 2 1
921GB 50386 1/4" x 3' High-Pressure Hose w/ Swivel
(without couplers) 1 1 1 1 1 1
P 1725 31353 Hydraulic Foot Pump
(includes Keys C, D) 1 1 1
Q 37729 37729 1/4" x 10' High Pressure Hose Unit
(includes 2 each of Keys N, O) 1 1 1
52515 52515 1/4" x 10' High Pressure Hose
Replacement (without couplers)
R 30206 30206 Plastic Carrying Case 1 1 1
18402 18402 Metal Carrying Case 1 1
S 23955 23955 Metal Carrying Case 1 1 1
30236 30236 Plastic Carrying Case 1
31068 31068 Metal Carrying Case 1
Parts List
Standard and Slug-Buster
®
punches, dies and draw studs listed on the
following page are capable of punching a maximum of 10 (.1344", 3 mm)
gauge mild steel. Slug-Splitter
®
punches, dies and draw studs listed on the
following page are capable of punching a maximum of 10 (.1344", 3 mm)
gauge stainless steel.

Related product manuals